spacer Phelps Industrial Products, Inc. spacer
spacer Home Compressed Gasket O Rings, Molded Parts Fast Fix spacer
spacer Contact Us Gasket Material Metal Gaskets Additional Products spacer
spacer Gaskets Compression Packing Marine Products Cautions & Waranty spacer
spacer spacer spacer
Style 7461
 

Polyurethane Foam

Polyurethane Foam
This light weight foam material is a very cost effective cushioning material well suited to dry applications. Our material has been tested by Underwriters Laboratory and recognized for its flammability resistance.

Full rolls, part rolls and sheets are available from stock. Also available with optional pressure sensitive adhesive identified by adding suffix A to the style number.

Roll lengths vary and should be verified.

Sizes other than those shown are available upon request.

This material is gray in color and has an exposed cell finish.
Density
2 lbs. per cubic foot ±10%
Color and Finish
Gray, exposed cell
Temperature
300oF/149oC in dry environment
Tensile
20 PSI minimum
Elongation
200% minimum		 Tear Resistance
2 PPI minimum
Compression Set
After 50% deflection, 10% maximum
Specifications
U.L. recognized--U.L. 94, rating HF-1 comparative testing for flammability.
Applications
A very inexpensive cushioning material most often used in dry applications.
Gauge 1/4" 3/8" 1/2" 3/4" 1"
Width 54"
Typical Roll Length 50 ft.
 
 
 
 
 
 
 
 
 
 
 
 
Phelps Industrial Products, Inc., 6300 Washington Boulevard, Elkridge, Maryland 21075-5397