This product can be used anywhere a high temperature sealant/adhesive is required. Style 9815 can be This This product can be used anywhere a high temperature sealant/adhesive is required. Style 9815 can be applied outdoors at temperatures as low as -37F. Sticks to metal and glass surfaces. For best results clean with a solvent such as xylol, toluol or methyl ethyl ketone. Style 9815 is 100% Silicone.
 

Color:	Red
Processing:
Temperature Range	+650F (343C) to -75F
Tooling Time	5 - 10 minutes
Tack Free Time @ 75F (24C) 50% RH	15 minutes
Run on Sag	NiL
Shelf Life Stored @ or Below 90F (32C)	1 Year
Physicals Properties:
Durometer (After 7 Days @ 77F (25C) + 50% RH)	25
Tensile Strength, PSI (Mpa)	350 (1.9)
Elongation	500%
Specific Gravity	1.04
Tear Strength PPI (N/m)	30952.5 (10.2)
Meets Following Specifications:
FDA Criteria	Pass
USDA Criteria	Pass
NSF Std. 51	Pass
UL	Approved
US Federal Specifications:
TT-S001543A	Pass
TT-S-00230C	Pass
Canadian Specifications:
19-GP-9MA, Type 1	Pass
Electrical Properties - Cured 7 Days @  77F (25C) + 50% RH)
CTM 0114 Dielectric Strength, Volts/Mil	390
CTM 0112 Dielectric Constant At 100 Hz 100 KHz	2.53  2.49
CTM 0112 Dielectric Factor At 100 Hz 100 KHz	0.0087  0.00307
CTM 0249 Volume Resistivity, ohm-cm	1.70 x 1014

Note: Solvent use requires adequate ventilation. Avoid heat, sparks and open flames. Can be stored at or below 90F (32C). 

Packaging - Available In

Caulking Tubes 10.1 Oz	Squeeze Tubes 2.5 Oz
12 Per Case or Single Tubes	12 Per Case

5 Gallon Pails and 55 Gallon Drums are available by special order.