spacer Phelps Industrial Products, Inc. spacer
spacer Home Compressed
                  Gasket O Rings, Molded Parts Fast Fix spacer
spacer Contact
                  Us Gasket Material Metal Gaskets Additional Products spacer
spacer Gaskets Compression Packing Marine Products Cautions & Waranty spacer
spacer spacer spacer
Style 8200
L.S.T., L.S.D., L.C.U., Ramp Door Gasket

Extensively used by the United States Navy and Coast Guard as a landing craft ramp door gasket.

Utilizing similar material to Styles 8000 and 8001 hatch packing, an additional 1/4" thick layer of Cloth Inserted Rubber laminated into the open cell platform provides a very sturdy base.  The dome of Open Cell Sponge creates a lively sealing area, and the entire section is completely weatherproofed by a tough Nylon inserted Neoprene jacket.

1/4" thick Cloth Inserted Rubber laminated between layers of Natural Rubber Open Cell Sponge.
Natural Rubber Open Cell Sponge
Nylon inserted Neoprene

ASTM D 1056-54T R013
Density 9-13 PSI
Passes heat aging test 7 days @ 158°F Tests per ASTM Method 13
Tear strength 300 PSI both directions Burst Pressure 950 PSI

Standard Size
Width 5", base 3/4" thick, dome width 3", overall height 2 1/4"
10 ft.

Easy to install joint bandages of jacket material supplied with gasket.

Sturdy wooden crate.

The combination of materials provides a very sturdy base with a “lively” dome seal.  Long-lasting and weather resistant.  Reinforced jacket resists tears and abrasion.

Phelps Industrial Products, Inc., 6300 Washington Boulevard, Elkridge, Maryland 21075-5397