spacer Phelps Industrial Products, Inc. spacer
spacer Home Compressed Gasket O Rings, Molded Parts Fast Fix spacer
spacer Contact Us Gasket Material Metal Gaskets Additional Products spacer
spacer Gaskets Compression Packing Marine Products Cautions & Waranty spacer
spacer spacer spacer


Style 7100
 

Compressed Sheet

Performance Compressed Aramid Fiber With Buna-N Nitrile Binder

Compressed sheet constructed with fibers providing chemical stability and heat resistance.  The Nitrile binder offers good resistance to various oils, petroleum derivatives, low pressure steam, gases, etc.  Resistance to high temperature creep with torque retention provides its sealing properties. This material is particularly good in 150 lb., and 300 lb., steam applications. Suitable for potable water.

This material is green in color and has a smooth finish

Physical Properties

Temperature
700°F Maximum / 520°Continuous / 450°F Steam

Pressure
1500 PSI

Color
Green

Composition
Fiber  Aramid Blend
Binder  Nitrile

pH
3 - 11

Density
1.75 Spec. Gravity

PxT Values
1/16" - 350,000
1/8" - 210,000

ASTM F 104 Tests 1/32" Thick

F 38 B Creep Relaxation
22 Hrs @ 212°F (100°C) 9.3%
22 Hrs @ 392°F (200°C) 16.9%

F 146 Thickness Increase
Oil #3, 5 Hrs @ 300°F 5% - 7%
Fuel B, 5 Hrs @ 73°F 5% - 7%

F 36 A Compressibility
5000 PSI Gasket Load 8.5% +/- 1%

F 36 A Recovery 57%

F 152 Tensile Strength 1500 PSI

DIN 3535 Part 6 Gas Leak Rate
Nitrogen @ 580 PSI/Gasket Load 4640 PSI 
.05 cc/min

DIN 52913 Stress Relaxation @ 7250 PSI
16 Hrs @ 347°F > 5220 PSI (36 MPA)
16 Hrs @ 572°F > 4060 PSI (28 MPA)

Hot Compression Test 
7250 PSI @ 572°F (300°C) 15% Total
7250 PSI @68°F(20°C) 8.2% Total
(1/16" Thickness Used For Testing)

As in all compressed sheets the P x T values decrease significantly as the thickness increases. Our maximum temperature, pressure and P x T values cannot be exceeded.
Values for DIN flanges approximately 10% less.


Thickness 1/64", 1/32", 1/16", 3/32", 1/8", 3/16", 1/4"
Sheet Sizes (Additional Sizes Available) 60" x 60", 60" x 120", 60" x 180", 80" x 80"

Meets: ASTM F104-F712111-B5E11M5

 
 
 
 
 
 
 
 
 
 
 
 
Phelps Industrial Products, Inc., 6300 Washington Boulevard, Elkridge, Maryland 21075-5397