High Performance Compressed Aramid Fibre Blend With Buna-N Nitrile Binder
Style 7010 is a dense Compressed Gasket Sheet reinforced with an Aramid fiber blend with a Nitrile rubber binder. This sheet has a special high temperature anti-stick coating applied to both sides. Our material is engineered for super heated steam, thermal cycling, boilers, heat exchangers and is recommended for sealing gases, fuels, oils and refrigerants. This material’s high tensile strength gives it excellent resistance to hot creep relaxation at elevated gasket stress loads and has very good torque retention.
Style 7010 is an ideal high performance gasket material.
1000°F Maximum / 700°Continuous / 600° Steam
|ASTM F 104 Tests
F 38 B Creep Relaxation
F 146 Thickness Increase
F 36 A Compressibility
F 36 A Recovery 55%
F 152 Tensile Strength 2610 PSI
DIN 3535 Part 6 Gas Leak Rate
DIN 52913 Stress Relaxation @ 7250 PSI (50
Hot Compression Test
|As in all compressed sheets the P
x T values
decrease significantly as the thickness increases. Our maximum
pressure and P x T values cannot be exceeded.
Values for DIN flanges approximately 10% less.
|Thickness||1/64", .020", 1/32", 1/16", 3/32", 1/8"|
|Sheet Sizes (Additional Sizes Available)||60" x 60", 60" x 120"|
Phelps Industrial Products, Inc., 6300 Washington Boulevard, Elkridge, Maryland 21075-5397