Ethylene Propylene, EPDM
Full rolls, part rolls and sheets are available from stock.
Roll lengths vary and should be verified.
Sizes and hardnesses other than those shown are available upon request.
This material is black in color with a smooth finish.
Color and Finish
-40oF/-40oC to 250oF/121oC
890 PSI minimum
ASTM D 2000: 3BA608A14C12F17
Best for ozone, UV, saltwater and weather. Water, steam, oxidation, hydraulic phosphates and silicates, alkali, acids depending upon type and strength, chlorine, salt water, MEK. Very good low temperature flexibility. Good impact and abrasion resistance.
|Typical Roll Length||100 ft.||50 ft.||40 ft.||40 ft.|
Phelps Industrial Products, Inc., 6300 Washington Boulevard, Elkridge, Maryland 21075-5397