 |
 |
 |
|||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|||
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
| Style 2110 |
 |
 |
| Pure Graphite
and Inconel Wire
Braided from flexible pure graphite and inconel wire. Style 2110 contains high density pure graphite strands with inconel wire running down the center of each strand. All strands are then braided into the required square cross section. This construction creates a mechanical packing that can withstand working pressure and temperature that are impressive especially in valves |
| Construction Braid Over Core Base Material Flexible pure graphite and inconel wire Shape Square Temperature 2000oF pH 0-14 Pressure Valve 7000 PSI |
FPM Rotating pump: 1970 Reciprocating pump: 390 Application Best high pressure valve packingAir, water, sea water, brines, super heated steam, sludges, slurries, waste, petroleum oils, petroleum fuels, solvents, chemicals, agitators, dryers, mixers, blowers. Advantages The heat dispersion properties and compressibility of graphite makes this the most capable packing on the market today. Maximum Size 2" |
| Feet Per Pound |
| 1/8" | 3/16" | 1/4" | 5/16" | 3/8" | 7/16" | 1/2" | 9/16" | 5/8" | 3/4" | 7/8" | 1" |
| 109.37 | 62.49 | 29.85 | 19.40 | 14.18 | 10.02 | 7.60 | 6.20 | 5.19 | 3.57 | 2.81 | 2.15 |
| *See special installation procedures with shipment. |
| Phelps Industrial Products, Inc., 6300 Washington Boulevard, Elkridge, Maryland 21075-5397 |